Urea Crusher Fertilizer Making Machine
- Information
Introduction of Urea Crusher Fertilizer Making Machine
The urea crusher is a device specially used to crush urea granules into powder granules. The equipment is widely used, not only can be used to crush other kinds of compound fertilizer granules, but also can be used for fertilizer crushing in the water-soluble fertilizer industry, and feed crushing, etc. Roller crushing is adopted, the crushing is uniform and the effect is good. Simple and compact structure, small footprint. The sealing effect of the whole machine is good, it is not easy to block and easy to clean. The broken mesh number is adjustable, and there is no agglomeration after crushing.
Feature of Urea Crusher Fertilizer Making Machine
1. The crushing speed is fast and uniform
2. The crushed finished product has fine granules and no dust
3. The equipment occupies a small area and runs smoothly
4. The equipment has good sealing performance and is not easy to block
Working Process of Urea Crusher Fertilizer Making Machine
The urea pulverizer can be used when it is powered on. The material enters through the feed port, and is crushed into crystals by roller crushing, and the output particle size is between 0.1-0.5mm. The crushing fineness is controlled by the distance between the two rollers, the smaller the distance, the finer the particles. The more uniform the crushing effect, the higher the output. This equipment is suitable for crushing all kinds of bulk fertilizers and other medium-hard bulk materials.
Technical Parameter of Urea Crusher Fertilizer Making Machine
| Model | Capacity (t/h) |
Power (kw) |
| UF650 | 1-3 | 18.5 |
| UF850 | 4-6 | 22 |
| UF1000 | 8-10 | 30 |
Product Details of Urea Crusher Fertilizer Making Machine
For the urea crusher process, you can choose an ordinary urea crusher or a stainless steel urea crusher, depending on the following factors：
1. Special raw materials: Stainless steel urea crusher has better anti-corrosion properties and is easy to clean.
2. Crushing effect: A stainless steel urea crusher is usually more wear-resistant, can handle harder materials; and has a higher crushing effect.
3. Cost-effectiveness: Relatively speaking, stainless steel urea grinders are more expensive, while ordinary urea grinders are more economical and durable.
